Is Mivo a manufacturer of vertical semi-continuous copper billet casting lines?
Yes. Mivo manufactures copper casting equipment in China, including semi-continuous casting lines for copper and copper alloy billet, slab, and hollow billet projects.
Semi-Continuous Casting Equipment
Vertical Semi-Continuous Copper Billet and Slab Casting Line
Manufacturer page for Mivo semi-continuous casting equipment used in copper and copper alloy billet, slab, and hollow billet projects for extrusion, forging, and rolling applications.
Vertical DC Process
For billet, slab, and hollow billet projects
Copper and Copper Alloy
Project scope reviewed by alloy and product form
Factory to Site Support
FAT, shipment preparation, and commissioning planning
Equipment Gallery
Product Overview
Mivo's semi-continuous casting line uses the vertical direct-chill process to produce large-format copper and copper alloy billets, slabs, and hollow billets. The process is typically reviewed for downstream extrusion, forging, and rolling projects where buyers need fixed-length cast products rather than continuous flat-profile output.
Molten metal enters a water-cooled mold and is withdrawn downward at a controlled rate. As the billet exits the mold, direct water spray supports rapid solidification of the outer shell. Final configuration is then reviewed according to alloy, product form, dimensions, production target, and plant conditions.
Specific parameters remain project-dependent and should be confirmed during technical review instead of being treated as one fixed standard for every inquiry.
What Buyers Usually Confirm Before Equipment Scope Is Finalized
- Target product form: round billet, slab, or hollow billet
- Copper or copper alloy grade and downstream process route
- Required dimensions, cut length, and annual output target
- Plant conditions such as power, cooling water, floor layout, and handling arrangement
- Whether factory review, shipment preparation, commissioning support, and operator training need to be included in the project scope
How the Process Works
- 01 Melting
Copper or copper alloy is melted to the required casting condition and reviewed before transfer.
- 02 Transfer and Head Control
Molten metal moves into the transfer and mold-feed section, where stable process control is maintained above the mold inlet.
- 03 Mold Entry
Metal enters the water-cooled mold and the outer shell begins to solidify.
- 04 Direct-Chill Cooling
As the cast body exits the mold, direct water cooling supports solidification across the section.
- 05 Controlled Withdrawal
The lowering system withdraws the cast body at controlled speed while key process parameters are monitored.
- 06 End of Cast and Cutting
When the required cast length is reached, the cycle ends and the billet or slab moves to the next handling or cutting step.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Form | Round billet / rectangular slab / hollow billet |
| Cross-section | Custom — specify diameter or dimensions on enquiry |
| Alloy Grade | Copper, brass, bronze, CuNi, CuCrZr — per specification |
| Annual Capacity | Configured to project requirement |
| Furnace Capacity | Per project specification |
Parameters are reviewed case by case. Send your alloy, product form, dimensions, and production target for a project-specific equipment discussion.
Key Features
- Induction or shaft melting furnace
- Water-cooled copper mold — custom cross-section
- Direct-chill (DC) water spray system
- Hydraulic lowering table — controlled withdrawal speed
- PLC process control with cast parameter logging
- Suitable for copper and copper alloy grades
Typical Applications
- Copper and brass extrusion billet
- Forged fitting and valve blanks
- Rolling slab for plate and strip
- Specialty alloy producers (CuCrZr, CuNi)
- Hollow billet for tube extrusion
Factory review, export delivery, and commissioning support
Before shipment, the line can be reviewed through factory acceptance planning so buyers have a clearer picture of equipment readiness, process flow, and the scope that will move to site for installation. This is especially useful for export projects where startup risk needs to be controlled before the line reaches the plant.
During project execution, Mivo can support shipment preparation, installation coordination, parameter confirmation, and operator training according to the actual alloy, product dimensions, and production target being reviewed.
After handover, follow-up support can continue with troubleshooting review and recommendations for common spare parts and scheduled maintenance items. This matters because downstream extrusion, forging, or rolling plans depend on stable billet quality and production continuity.
Get ROI & Pricing
Share your alloy, product form, dimensions, and annual tonnage target. Mivo will review the right configuration scope for your project.
Get ROI & Pricing Semi-Continuous Casting OverviewManufacturer Profile
- Company
- Mivo
- Office
- Shenzhen, Guangdong, China
- Factory
- Shenyang, Liaoning, China
- Equipment Type
- Vertical semi-continuous copper casting line
- Project Scope
- Process review, manufacturing, export delivery, commissioning support
Semi-Continuous Casting FAQ
Common Questions from Copper Billet Casting Buyers
These answers focus on manufacturer identity, project review inputs, and export execution support.
What information should buyers send before asking for a semi-continuous casting line proposal?
Buyers should usually send the target product form, alloy grade, billet or slab dimensions, annual output target, downstream process, and basic plant conditions such as power, cooling water, layout, and handling arrangement.
Can Mivo support export delivery, factory review, and commissioning planning?
Yes. Mivo can support project review, factory acceptance planning, shipment preparation, installation coordination, operator training, and follow-up technical support according to project scope.
Does Mivo publish fixed standard parameters for every semi-continuous casting line?
No. Final configuration depends on the alloy, product form, dimensions, production target, and plant conditions of each project, so the equipment scope is usually reviewed case by case.
Ready to review your semi-continuous casting project?
Send your alloy grade, product form, dimensions, output target, and plant conditions. Mivo can reply with a project-oriented configuration discussion.
Get ROI & PricingGet in touch
Ready to discuss your casting line requirements?
Our engineers can help you select the right equipment configuration for your capacity needs and product specifications.